Skip to main content
This website uses cookies. By continuing to use this website you are agreeing to our use of cookies as described in our privacy policy.

Time is Up: Are you WHMIS 2015 Compliant?

Reading Time 2 minute read

"Do" Diligence: OHS/WSIB Newsletter

WHMIS is a national program of hazardous materials labelling, information, instruction, training and general health and safety awareness. In February 2015, changes were made to WHMIS to implement elements of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS). This modified version of WHMIS is now known as WHMIS 2015.

Over the past few years, timeframes for implementation by various workplace parties have been changed and extended except for one; employers must complete the transition process from WHMIS 1988 to WHMIS 2015 by December 1, 2018. This means there should be no hazardous products in the workplace with labels and material safety data sheets under the WHMIS 1988 standards.

There are, of course, exceptions to assist employers with unused products under the old WHMIS standards. For example, federally regulated employers have to meet the December 1, 2018 transition period. However, if by December 1, 2018, they still have products in their workplaces with labels and MSDS' under the old WHMIS standards, they will have until May 31, 2019, to use and dispose of those products. On and after June 1, 2019, all products within federally regulated workplaces must comply with the new WHMIS requirements.

Provincial and territorial occupational health and safety agencies are responsible to establish requirements for workplace parties under their respective legislation for the transition period. For example, section 13(1) of Ontario's WHMIS Regulation, O. Reg. 860, states:

13. (1) An employer shall replace a WHMIS 1988 workplace label on a hazardous product, or container of a hazardous product, by affixing to the product or container a workplace label if,

(a) the WHMIS 1988 workplace label was affixed to the product or container on or before November 3, 2018;

(b) the WHMIS 1988 workplace label would have complied with the provisions of this Regulation relating to workplace labels for that hazardous product as they read immediately before July 1, 2016; and

(c) this Regulation requires that a workplace label be affixed to the product or container.

Employers should review the specific legal obligations in their province or territory in order to ensure compliance with labelling and safety data sheet requirements under the new WHMIS regime.

Worker training should also be completed by the December 1, 2018 timeframe. As products were coming into the workplace with new WHMIS 2015 labels and safety data sheets, employers should have been proactively educating their workforce. However, if you have not yet trained your workers in WHMIS 2015, now is the time to complete worker training in accordance with the new standards. No more delays; deadlines are here.


    Receive email updates from our team